If you want to replace the faucet in the bathroom or in the kitchen, but there is no experience in performing such works, do not despair. This does not mean that the task is impossible and you have to call the plumbing. It is enough to carefully study the manual and carefully follow all the requirements of the instructions. Do you agree?
We will tell you in detail how to install the mixer on the sink. Here you will find out what technological features must be observed when installing the device, what types of sinks are installed. The article also lists common mistakes that are undesirable for the home master.
Mixer installation: technology analysis
Almost every adult male is able to complete the installation of the mixer at home. It’s just that there’s not always a similar experience behind, and it’s sometimes awkward to ask more experienced colleagues.
A detailed installation process will come to the rescue, which will save you from many questions and give you confidence in your own strength - it’s quite easy to cope with the installation of the mixer.
How to prepare for installation?
Before you start the installation directly, you have to go through the preparatory phase. First you need to carefully inspect the sink, if it is already installed in the bathroom. If this is a kitchen sink, then it still has to be explored. First of all, the number of holes provided by the manufacturer for the future mixer is of interest.
For a sink with 3 holes, you cannot buy a faucet with a lever that controls the temperature of the supplied water. Another model is needed here
Often the manufacturer completes the original sink bowl with a mixer with all the parts necessary for installation. But this is possible only in expensive models, where all the elements of plumbing are decorated in the same style.
It is important when buying a mixer to check whether all parts are included. After all, installation requires nuts, gaskets, flexible or rigid eyeliner. The presence of all components should be paid attention to before purchasing the product.
If the mixer is purchased through the Internet, then, after unpacking the purchase, you should consider everything, study the available parts, instructions and assemble the tap in the sequence indicated in it
When the mixer of the desired model and size is purchased, the instructions are studied, it remains to be installed. To do this, you will need tools that it is desirable to prepare before starting work.
These are wrenches and adjustable spanners, sealing tape, masking tape, a small wrench, a screwdriver, pliers, a flashlight, a plumbing fixture kit with all the accessories, a piece of soft cloth.
You may need to buy an additional 2 flexible hoses if the length of the pipes coming with the mixer is insufficient. And you will also need a hacksaw for metal if you have to install a model with a bottom valve that has mechanical adjustment.
It is important that everything you need is at hand and not distracting during installation.
If the bathroom was already in use, then most likely you will first have to remove the old faucet. It is important to do everything extremely carefully so as not to damage the sink if it is not planned to replace it. It is better to lay a piece of soft cloth at the bottom of the container in order to avoid accidental chips and scratches.
Then you need to turn off the taps for supplying water to the mixer. If there are none, then you have to block the water in the entire apartment / house. Then you need to check this by opening the mixer - if nothing drips, then you can proceed to dismantle.
If you plan a complete change of the plumbing kit, then, of course, the sink is installed first. Then it will be necessary to shut off the water supply and lay a soft cloth on the front of the container to protect against accidental damage.
Installation Technology Description
If the preparatory work is carried out correctly, then installing the mixer on a ceramic sink will not take much time - on average it will take about 30 minutes. This is provided that the instructions that come with the kit are read and the mixer itself is assembled.
Some mixers are sold disassembled - before you begin installing this model, you have to assemble it
It is easiest to install the mixer on a ceramic sink if it is not already fixed at its workplace. When this is not possible, installation may be a little difficult and you will need a flashlight. In places that are difficult to reach, you will have to flash a flashlight - an assistant will be required here.
It is important to measure the estimated length from the tap to the water pipes before buying and evaluate the length of the supply hoses that come with the mixer
In order to attach the mixer to the sink, you need:
- Use a 10 or 11 wrench to screw the flexible eyeliner to the mixer. You can use a flexible corrugated stainless steel tube.
- Place rubber or silicone gasket on tap base.
- Screw in 2 studs with a key or hand in turn. If the model comes with a sleeve, then no studs will have to be set.
- Thread the flexible hoses into the hole in the sink.
- Fit a horseshoe-shaped mounting piece from below.
- Wear a metal washer of the same shape on top of the gasket.
- To fix on each of two hairpins on a union nut, having tightened with an adjustable or wrench for reliability.
When tightening the nuts, it is important not to overdo it - the connection may break and will leak water. If the nuts are loosened tightly, the fastener will hang out and the faucet on the sink will later dance from side to side.
Image Gallery
Photo from
Step 1 - Connect the eyeliner
Step 3 - Screw 2 Studs
Step 4 - Fasten to the Sink
It is important when tightening the nuts to wrap the outer part of the mixer with masking tape so as not to scratch the decorative coating during work. Also, a piece of soft cloth should be put in the sink to avoid accidental damage to the surface.
After reliable fixation of the mixer on the side, it is necessary to connect it to the water supply network. To do this, you need to connect the free ends of a flexible or rigid eyeliner to the water pipes, fixing all with nuts.
A sealing tape may be needed here to make the connection airtight. For a stronger connection, you can use an adjustable wrench.
When connecting the eyeliner to the water supply pipes, it is important not to mix up hot and cold water
Of great importance is the length of the eyeliner - it must be correct. Too long a tube will interfere and can twist several times, which will reduce its service life. If it is short, then it is better to replace it immediately, rather than build up. You can use a rigid eyeliner, but it is more difficult, because the exact dimensions are important here.
The ideal eyeliner length is the key to a long service life - if it is a high-quality food rubber with a stainless steel frame, then its service life is 10-15 years
The final stage of installation
It remains to put a siphon on the sink, and if necessary, then the bottom valve - depending on which model is used. There are mixers that come with a bottom valve with mechanical adjustment. Here, after clarifying the required length, you have to use a hacksaw to cut off the excess.
To put the siphon on the sink, you will need to collect it, following the instructions. Then put on the lower part, pre-installing the gasket. A gasket and a stainless release with a screw are to be put in the outlet of the sink. This screw must be tightened tightly with a screwdriver - it connects the siphon to the sink.
It is important not to overtighten the mount - it may crack and you will have to buy a new siphon
It remains to connect to the sewage system. To do this, a corrugation is connected to the siphon, on the reverse end of which an adapter is put on, connecting the entire structure to the sewer pipe.
Now it’s time to check the system’s health. To do this, open the water supply to the apartment / house and open the tap. If water flows, then the tap is installed correctly. It remains to inspect all the connections so that nothing drips anywhere. If everything is in order, then we managed to cope with the work "perfectly".
Nuances of installing a mixer
With the installation of a faucet on ceramics, everything is clear, but questions may arise when the sink is made of another material. There are small nuances that we’ll take a closer look at now.
If a stainless steel sink
The most important thing in installing a mixer is to choose the right model and correctly complete each stage of the work. This is not difficult, but requires attention and calm. If the sink is stainless steel, then you need to choose a mixer of suitable design, size and shape.
Moreover, most often stainless steel is used for the manufacture of a kitchen sink - it is a durable material. It is more convenient to mount the mixer in a stainless steel when it is not installed in the workplace.
Image Gallery
Photo from
Connection of a flexible eyeliner before installation of the mixer
Fixing the mixer to the dismantled sink
Choosing a perfectly flat area for mounting the mixer
The process of tightening eyeliner and studs
If there is no way to remove the sink, you have to enlist the help of a friend, son, wife or other person. After all, the conditions in which the stainless steel sink is located are very cramped. Therefore, without an assistant and a flashlight can not do.
The process of mounting the mixer on a stainless sink is similar to installing it on a ceramic sink. If there is no hole for the mixer, then it is easy to cut it with your own hands, treating the edges to make them smooth.
If the faucet is placed on overhead plumbing, the installation for the bidet or for the sink is first installed. Then a bowl of plumbing equipment is hung on this support frame, after which the fittings designed to supply water to the consumer are connected directly.
If the glass sink
Often, glass products are used in the interior. False sinks made of this material look especially stylish. Moreover, they can be of different shapes, colors and sizes - it all depends on the flight of designer imagination.
Image Gallery
Photo from
Colored glass sink
Backlit glass sink
There are no difficulties in installing the mixer on a glass sink. It is important to adhere to safety rules and choose the most suitable model.
Often a waterfall - frap mixer is selected for glass sinks. Some manufacturers supply a mixer and a bottom valve.
Installation is made on that surface in which the opening is provided. If this is a model mounted on a pedestal, the so-called shell-tulip, then you have to work with this foundation.
If the sink is a standalone product, it has holes for the mixer. It is important here not to drop anything heavy and not to drag the mount
When working with glass, you can’t rush - although it is heavy-duty, it can break when the hammer falls.
Other types of shell material
In addition to ceramics, glass and stainless steel, marble, porcelain, granite, plastic, acrylic and even wood are used to produce sinks. Porcelain containers are quite expensive.
As for the installation, it is simple and depends on the type of mixer to be installed. To the purchased model there is an instruction in which it is indicated in detail how to correctly carry out the installation.
Porcelain sink looks elegant and refined. For her, mixers of a special configuration are most often provided when the valves for supplying water are located separately from the spout. There are corresponding holes in the shell
If the bathroom has a sink or a pedestal for a wooden sink, the installation of the mixer is not particularly difficult. The only thing is that this material is rather capricious and will simply not be able to serve for a long time. Most likely the tap will survive the sink.
A wooden sink can be made in the form of a bowl, mounted on a base made of polymer or other material. In this case, the installation of the mixer will occur in the base
For marble, granite and acrylic, a mixer installation technology similar to that on a ceramic sink will be used. It is important to assemble the mixer correctly, and in the process of tightening the fasteners, do not overtighten anything and carefully carry out the connection and sealing units.
A granite sink is most often used for the kitchen. It allows you to add sophistication to the design of the room. Often, the manufacturer completes a granite sink with a suitable mixer model
Installation errors
When the installation is done by an invited master who has remarkable experience, the result of his work will be excellent - he knows all the nuances for sure. But self-assembly does not exclude the occurrence of various troubles. Especially if such work is carried out for the first time in my life.
Firstly, after installation, you can find that the crane is dancing side to side or leaning sideways. This problem will not occur if, at the stage of its connection with the sink, the nut is carefully fixed. You also need to check the correct placement so that you do not have to redo the work.
When the mixer is installed correctly, the lever deflection angles for turning on hot and cold water relative to the tap are equal
The second trouble is that when you turn on hot water, cold water flows and vice versa. This is also an easy fix.
Just at the stage of connecting the tap to the water supply, there was a mess with the pipes. It is necessary to shut off the supply of cold and hot water, disconnect the flexible eyeliner and, swapping the tubes, reconnect them.
Most often, there is a hot water supply pipe on the right and cold water on the left. If water meters are installed nearby, then you can determine
As a result, a flexible eyeliner with a red ribbon should connect to the pipe supplying hot water, and the tape, in the braid of which is blue, should be connected to the cold water pipe.
Cold water can be supplied through an eyeliner with a blue ribbon or through a universal one that has both a red and a blue ribbon in a braid
Thirdly, leaks may occur at the joints. This is the result of loosening the nut. It should be tightened in the place of leakage and look again. If the leak does not stop, then the reason may be in the nut itself - maybe it was pulled over and it burst. Have to use a spare.
Silumin nuts are especially often broken - products made of this material attract with their low price. It is extremely undesirable to use them at home - a more expensive product will last 10-15 years without requiring replacement
Fourth, flexible eyeliner can burst.
This happens if during installation one of the situations arose:
- the flexible tube was short and had to be pulled a little;
- attached too long eyeliner, it twisted and bent several times;
- liner made of technical rubber with an aluminum frame, and the connection point is hard to reach. She was sharply bent and broke;
Whatever the reason, it remains to be eliminated. It is bad when there is not enough length, but no less bad when this length is abundant.
It is right to choose the optimal eyeliner, taking into account the material - it is desirable that the rubber tube be made of food rubber, and the outer braid is made of stainless steel or galvanized.
Image Gallery
Photo from
Flexible hose bends smoothly
Cheap hose breaks easily when bent
Cracked nuts
Stainless steel corrugated pipe
The following article will familiarize you with the rules for installing the mixer on the plumbing in the bathroom, the contents of which we recommend that you read.
If the length of the flexible eyeliner that comes with the mixer is short, you should buy a longer one. The video clip tells in detail about the nuances of these hoses and the rules of choice:
It is convenient to mount the mixer if the sink is not already installed. So there is comprehensive access when tightening various fasteners:
Even the original frap mixer must be carefully inspected and assembled before installation. And after completion of installation work, you should check its performance:
If everything is done correctly and slowly, then installing the mixer will be an interesting pastime. An independently completed work front will delight you with an excellent result, which is in no way inferior to professional installation made by an experienced plumber.
It is important that everything is securely fixed, but without fanaticism - fasteners do not like to be pulled.
Please write comments in the block below. Ask questions about controversial issues, share useful information on the selection and installation of a kitchen faucet. Perhaps you want to tell how you installed it yourself?