Modern fluorescent lamps (LL) perfectly cope with lighting of residential, working and technical premises of a large area and can reduce the total electricity consumption by 50-83%, thus reducing utility bills.
In this article, we consider the performance characteristics of LL, their device, we will analyze the main advantages and disadvantages compared to other types of lighting devices. In addition, we give thematic photos and diagrams, as well as videos about the principle of operation of fluorescent bulbs and the features of their application.
The principle of operation and the device LL
A luminescent device is a gas-charging light source, where an electric discharge in mercury vapor creates intense ultraviolet radiation.
Compact modules of the luminescent type have a standard base, thanks to which they become a convenient replacement for bright, but more energy-consuming incandescent lamps.
How does a fluorescent light bulb work?
A special composition called a phosphor, consisting of calcium halophosphate mixed with additional elements, transforms its light into the light visible to the human eye.
After connecting a fluorescent lamp to the central power supply network, a so-called glow discharge is required to be maintained inside the glass bulb.
It makes it possible to ensure the luminescence of the phosphor layer in a constant mode and even during a short-term shutdown of the central power supply.
Previously, a classic fluorescent lamp looked like a tube sealed on both sides, inside which there are mercury vapor. Instruments are now available in more diverse forms and configurations.
Instrument Design Features
A traditional fluorescent lamp is a glass cylinder with an external diameter of 12, 16, 26 and 38 mm, usually presented as:
- straight elongated tube;
- curved U-shaped module;
- ring;
- complex figure.
Legs are hermetically soldered to end edges. On their inner side there are tungsten electrodes that are structurally reminiscent of bi-spiral filament bodies built into Ilyich’s bulbs.
In some types of fluorescent lamps, more progressive trispirals are used, which are a twisted bispiral. The devices equipped with them have an increased level of efficiency and a lower threshold of heat loss, which significantly increase the overall efficiency of the light flux
From the outside, the electrode elements are soldered to the metal pins of the metal base, to which the operating voltage is applied.
U-like and direct devices are usually equipped with G5 and G13 sockets, where the letter coding means the pin type of the base element, and the digital one shows how far the working elements are from each other.
The electrically conductive medium located inside the glass bulb has a negative resistance. When a rise in current occurs between two opposite electrodes that requires limitation, it appears and reduces the operating voltage.
A throttle or ballast is included in the circuit diagram for switching on a conventional fluorescent light bulb. He is responsible for creating the high-level impulse voltage necessary for the correct activation of the lamp.
The figure shows the internal arrangement of a fluorescent lamp and clearly explains the basic principle of operation of its main constituent elements
In addition to this detail, EMPR is equipped with a starter. It is an element of a glow discharge, inside of which two electrodes are located, surrounded by an inert gas medium.
One of them consists of a bimetallic plate. In sleep mode, both electrodes are in the open state.
Common types of such bulbs
The primary classification of products on a luminescent basis is made according to the level of base pressure. High-pressure devices are used for lighting installations of high power and outdoor street lighting.
Low-pressure lamps are used in everyday life to supply light to industrial, technical and residential premises for various purposes.
View # 1 - high pressure modules
High-pressure devices produce saturated light flux of good density. The inner surface of the bulb element has a special phosphor coating of fluorogermanate or magnesium arsenate.
The working power of such fluorescent lamps ranges from 50-2000 watts.
High-pressure mercury modules require 220-watt rated mains voltage for proper operation. Their ripple ratio is usually from 61 to 74%
A complete ignition of the lighting module occurs within 3 seconds. The service life of 80-125-watt products is about 6,000 hours, and lamps from 400 W or more can last up to 15,000 hours with the strict observance of the operating rules established by the manufacturer.
View # 2 - low pressure products
LL low pressure is used to provide light flow of residential, technical and industrial premises.
Structurally, the device is a solid glass tube containing argon inside under a pressure of 400 Pa and in a small amount of mercury or an amalgam. It is offered on the market in a wide variety of modifications and is equipped with two electrode elements.
The lowest temperature that low pressure LL can tolerate is -15 ° C. Therefore, for use in open areas, these light sources are considered irrelevant
The glass bulb may have a variety of diameters. The light output level varies depending on the power of the device itself. For its correct operation, a throttle starter is required. Average life is 10,000 hours.
Features of compact LL
Compact-type LLs are hybrids combining some specific distinguishing features of incandescent lamps and luminescent characteristics.
Thanks to advanced technologies and expanding innovative capabilities, they have a small diameter and small dimensions, typical of Ilyich bulbs, as well as a high level of energy efficiency, which is typical for the LL line of devices.
Compact-type LLs are produced under the traditional E27, E14, E40 caps and are very actively pushing classical incandescent lamps out of the market by providing high-quality light with significantly lower energy consumption
CFLs in most cases are equipped with an electronic choke and can be used in specific lighting fixtures. They are also used to replace simple and familiar incandescent lamps in new and rare lamps.
With all the advantages, compact modules have such specific disadvantages as:
- strobe effect or flickering - the main contraindications here relate to epileptics and people with various eye diseases;
- pronounced sound effect - during prolonged use, an acoustic background appears that can cause some discomfort in a person in the room;
- smell - in some cases, products emit caustic, unpleasant odors that irritate the sense of smell.
The latter position is more often observed in nameless crafts of Chinese origin, and the first two often suffer even branded appliances made in accordance with all the rules and modern requirements. Rating of the best CFL manufacturers we have given in this article.
Basic color temperature spectrum
The color of the glow is one of the most important parameters, which directly depends on the composition of the phosphor that converts ultraviolet radiation into light.
Today, the most common are 7 definitions of shades of the flow produced by fluorescent lamps:
- Forehead - natural white with a noticeable cold tint;
- LDC - natural daylight with improved color rendering quality;
- Ltb - warm white;
- LD - traditional daylight white;
- LB - classic white;
- LETS - natural with the highest quality transmission of shades;
- LHB - plain cold white.
For residential premises, where a person spends a lot of time, shades of warm colors or natural daylight with an increased level of color reproduction are suitable.
White and day tones, as a rule, are present in office, work, industrial premises, offices and classrooms. They contribute to concentration, increase brain activity and improve overall learning and productivity.
The coldest shades are used in medical institutions, laboratories, hospitals and technical rooms. They give objects extra clarity and enhance visual acuity.
Luminescents for meat display cases of food stores are distinguished by a specially selected spectrum of pink radiation. It emphasizes the natural shades of the product, making it more attractive in the eyes of customers.
The color components added to the phosphor allow you to get pink, blue, green and other unusual lamp shades.
Such devices are used for design, advertising and commercial purposes. With their help, they create an original glow, necessary in a particular individual case.
We wrote more information about the color temperature of light, the features of human perception of color and the nuances of choice in the next article.
Strengths and weaknesses of devices
As with any technical devices designed for lighting domestic and working rooms, fluorescent lamps have their own strengths and weaknesses.
Based on this information, it is possible to determine where it is more reasonable to use them, and in which cases it is worth giving preference to light sources of a different plan.
Positive sides of lamps
The main advantage of luminescent products is considered to be increased light output and a good level of efficiency. They provide the room with lighting that does not irritate the eyes, and demonstrate normal endurance even in intensive use.
The module is approximately 5 times higher than the base power of a conventional Ilyich bulb. A 20-watt luminescent gives a luminous flux equal to what a 100-watt incandescent lamp provides
A variety of temperatures of light shades, similar in scale to natural sunlight, make it possible to choose a suitable lighting device for various purposes and for rooms of any purpose.
The light flux emitted by the module is not scattered, but scattered. A calm, pleasing to the eye radiance comes not only from the tungsten filament located inside, but also from the entire outer surface of the bulb.
This allows the use of luminescent sources both for creating general background lighting and for organizing zone light.
For use in places where the lighting is turned on automatically, according to the signals of motion sensors, luminescents are not suitable. They are limited by the permissible number of inclusions for a certain time period and, if activated too often, can fail
The service life of luminescent products varies depending on the model and reaches up to 20,000 hours or up to 5 years.
However, the buyer should be aware that the lamp produces this resource only under such conditions as:
- the presence of a sufficient amount of high-quality power without jumps and drops;
- high-quality ballast;
- a certain number of activations, usually not more than 2000 for the first 2 years of use, which is only 5 inclusions per day.
Violation of these basic conditions will significantly impair the efficiency of the lighting device, and significantly shorten its life.
Modules can be used to illuminate greenhouses. They provide natural light as close to sunlight as possible, do not consume much power and exhibit good resistance to voltage surges typical of suburban power supply networks
The energy consumption level of luminescent is almost 5 times lower than that of traditional products, so they can be attributed to energy-saving light sources.
With their help, it will be possible to effectively illuminate a large room, without spending a lot of money on utility bills.
The working temperature on the surface of the flask does not exceed 50 degrees. This makes it possible to operate the lamp in rooms where increased requirements are imposed on fire safety.
The main disadvantages of the modules
The first big drawback of products is excessive sensitivity to temperature extremes. They strongly react to the movement of the mercury column and may stop working when the temperature drops below -20 ° C.
Heat exceeding +50 ° C, far from having the best effect on functioning and severely limits the range of use of these light sources.
Moisture resistance is also not a plus and does not allow widespread use of products in bathrooms and sanitary facilities.
Over time, the phosphor in lamp bulbs degrades and the radiation spectrum changes. At the same time, the light output level of the device decreases and the efficiency decreases markedly
Sometimes the light flow itself is also considered a drawback, having a linear, uneven spectrum that distorts the natural shades of objects in the room.
Not everyone feels it visually, but for those who pick up this minus too clearly, lamps with a phosphor close to a solid, more natural spectral color are sold. True, their light output is significantly less.
There are situations when the luminescence flicker with double the frequency of the supply network. This problem is solved by some improvement of the device, in particular, the use of electronic ballasts with a suitable level of the capacitance of the smoothing capacitor of the rectified current at the inverter input.
But the fact that manufacturers are trying to save money and do not equip the devices with capacitors of the required capacity is somewhat disappointing.
Household LL modules feel best when the ambient temperature is in the range from +5 to +35 ˚С. When the thermometer demonstrates lower performance, the start-up of the device is significantly more difficult, and the operating time is significantly reduced
The need for an additional starting device also slightly reduces the popularity of lamps. They definitely need either an excessively noisy and rather bulky inductor with a low reliability starter or a more advanced electronic ballast, which has a power adjustment function, but at the same time costs a lot of money.
Another weak point of luminescence is high sensitivity to inclusion. During the direct activation of the lamp on the electrodes, a special composition burns out and crumbles, which ensures the stability of the discharge and protects the inner tungsten filament from overheating.
Constant inclusion significantly reduces the life of the device. In addition, a noticeable flicker appears to the eye, and the edges of the lamp bulb darken and lose their aesthetics.
Chemical hazard to health
One of the main disadvantages of fluorescent light sources is the chemical hazard. The lamp bulb contains highly toxic mercury, and its amount ranges from 1 to 70 mg.
Vapors of this substance can be harmful to the health of people who are constantly in rooms lit by LL type devices.
The integrity of the spent lamp must not be violated, otherwise toxic mercury will enter the external environment. A penalty is provided for unauthorized disposal, so it’s better to transfer the product to a center that processes elements that are hazardous to nature and humans
When a module fails, it should never be broken or sent to an ordinary ballot box. It must be disposed of in accordance with the rules and regulations clearly described in current legislation.
For example, take them to landfills where toxic materials are taken from the public for their proper destruction or recycling.
Comparison with other light sources
LL-type products are significantly different from both obsolete incandescent lamps and progressive LED ones.
Compared with the first, they consume 5 times less electricity, while providing the same level of light flux saturation. But LED devices are somewhat inferior in power in combination with energy consumption.
The table clearly shows in numbers how much more profitable to use more modern sources of high-quality lighting instead of traditional Edison bulbs
True, the incandescent lamp burns at the same intensity for the entire period of operation, while luminescent loses part of its saturation due to the burning out of the inner layer, which reflects ultraviolet light.
LED products during operation gain some dullness due to the degradation of the working diodes. And in some models it is possible to adjust the brightness of the lighting with a dimmer.
In incandescent lamps or luminescent such a function is not provided. But this convenient mode in LED devices is not free and you will have to pay an additional amount for it.
In terms of structural fragility, incandescent and luminescent lamps are similar, since they have a glass bulb. Ice modules in this regard are more resistant to shock and mechanical damage. And the absence of any harmful and toxic elements inside makes them much more attractive for operation at home.
The highest costs for the entire operational period entail the use of incandescent lamps. Luminescent use energy within reasonable limits, and LEDs make it possible to reduce costs to the lowest possible levels
As for the financial side, an incandescent bulb is initially less than others. However, given its working life of only 1,000 hours, this can hardly be considered a pronounced advantage.
The base price of luminescents is higher, however, and they last much longer. As reputable manufacturers say, they last for 10,000-15,000 hours if the number of daily activations does not exceed 5-6 times.
LED modules can boast even better performance, but you will have to pay a lot more for this pleasure, and this is not always advisable. Although the tendency to replace some light sources with others, is observed everywhere. We wrote here about the need to replace fluorescent bulbs with LED ones and the procedure for doing this work.
What is the principle of luminescence? A detailed explanation of all the nuances of the operation of economical and energy-efficient lighting devices:
What are the main differences between fluorescent elements from simple and traditional incandescent lamps. Comparison of power, light flow and energy consumption of two modern lighting products:
What are compact energy-saving fluorescent bulbs? How they work, how many watts they consume and for what purposes they are used:
The luminescent type device is a practical analogue of a classic incandescent lamp. With it, you can provide high-quality light flow to a room of any size, while reducing energy consumption. It will last a long time and will not cause any significant trouble to the owners.
Then, when the lamps work out their life, they will need to be disposed of, and in exchange to buy new, more advanced modules.
What type of bulbs do you prefer and what do you think of fluorescent bulbs? Share your opinion with other users, tell us what you see as the main advantages of LL and what, personally for you, is a significant drawback of these devices.
If you have good theoretical knowledge on the topic of the above article and want to supplement our material with useful nuances, please write your comments in the block below.